Deluxe Telemaster 40 Kit

(No reviews yet) Write a Review
Usually ships in 7 t0 10 days - Kits are cut to order. $15.00 Shipping lower 48- International orders contact us about shipping.

Not all laser cut kits are created equal, some only have the ribs laser cut and that's it. Some have a few of the more complex outlines pre-cut. The Deluxe Telemaster 40 ALL Laser Cut Kit brings kit building to a completely new level of ease and precision. Just about every piece is precision laser cut and ready to assemble, every part fits the first time without modification. A unique lock and tab alignment system  assures a perfect part orientation and to speed the assembly. 

The fuselage is entirely pre-cut and is of tab-and-notch design, making it nearly impossible to build a warped or twisted fuselage. Kit includes a universal motor mount that accepts most any appropriate outrunner motor. A .40-.46 glow motor can also be used with the addition of pre cut ply motor mount. There is a large hatch on the top of the fuselage to access the battery/fuel tank. The wings are assembled over the full size plans with the pre-cut ribs dropping into place on the pre-notched spar, the sub-leading edge and sub-trailing edge are pre-notched for perfect alignment to the ribs. Even the premium quality balsa sheeting is pre-cut to shape and ready to glue in place. The wing design includes flaps and ailerons and is set up for standard size servos that install directly in the wings. The wing design is a two piece that bolts in place on the fuselage, this allows for easy transportation. The horizontal and vertical tail builds very quickly.   The plans show all parts and notes for easy building. All parts are laser numbered and for easy building.  It has never been easier to achieve professional results in the building of a wooden aircraft kit. Each kit includes one full laser cut kit, full size plans, aluminum main landing gear, hinges, pushrods, quality hardware. Follow the build thread on

Looking to save money see our Deluxe Telemaster 40 Combo.


Kits expected to leave our shop 7-10 days after order

Technical Specifications:

Length:   53-1/2"
Wingspan:   76"
Flying Weight:   7 lbs.
Controls: Ailerons, Elevator, Rudder, Throttle
Wing Area:  848 sq. inches



1 - 5-Channel Transmitter/Receiver + Y-harness Servo Reverser. 
OR a 6-Channel Transmitter/Receiver
6 - Standard Servos
2 - 12" Servo Extension
2 - 24" Servo Extension

1 - .46 Brushless Motor
1 - 13x8 Electric Prop

Motor Controller
1 - 65A Brushless ESC w/SBEC

1 - 4S 4000mAh 25C Lipo (optional to increase mAh or C)

1 - AC/DC Lipo Charger

Glue, Solder, Connectors, etc.